What precautions should be taken after calibrating a 3D welding table?

Precautions after calibration:

1. Handle with care to avoid impact: Handle workpieces gently during placement and operation to prevent impact on the platform surface.

2. Do not hammer: Never perform any hammering work on the platform surface.

3. Clean and maintain promptly: Wipe clean promptly after use. When not in use for extended periods, apply rust-preventive oil or grease for protection.

4. Use evenly to avoid localized wear: Use the platform evenly to avoid localized dents.

5. Keep clean: Keep the platform clean regularly to prevent iron filings, sand, and other impurities from abrading the surface.

6. Proper installation and support: During installation, the support bracket should be placed on the main support point, and the working surface should be leveled.

7. Unload workpieces promptly: After inspection or marking, the workpiece should be removed promptly and not left on the platform for extended periods. 8. Regular check-ups: Even if there are no obvious abnormalities, it is recommended to have regular check-ups based on the frequency of use (such as every 3-6 months or every 6-12 months).