China Solid Rivet Manufacturers Suppliers Factory

Your Professional Solid Rivet Manufacturer

Wuxi Lemar Metal Products Co., Ltd. is a professional fastener system service group integrating scientific research, manufacturing, sales and logistics. It follows the business philosophy of "striving for excellence and adhering to integrity" and has established a good image in the field of fastener manufacturing and sales. It has established long-term cooperative relationships with major well-known logistics brands at home and abroad to ensure that products are delivered to customers at the fastest speed and are well received by users.

Round Head Rivet
Number:LM-1240. Head Style：Domed. Type:Solid Rivets. Material: aluminum/copper/stainless steel
Copper Countersunk Rivet
Number:LM-1239. Material: Copper. Type: Countersunk Rivet. Name：CSK head solid rivets
Flat Head Solid Rivet
Number:LM-1238. Type:Solid Rivets. Material:Aluminium/Stainless Steel. Head Style：Flat Head

Why Choose Us

Technical team support
Possess full process manufacturing capabilities and experimental research and development capabilities for fasteners. With strong technical strength and 3D marketing network, it has more than 100,000 enterprise-level users and serves 57 industries.

Production Equipment
Our company has cold heading machines, thread rolling machines, wire drawing machines, thread rolling machines, tapping machines, vibration plate automatic assembly and other processing and feeding equipment.

Sales Market
Lemar Assisting scientific research enterprises,exported to Europe,North America, Africa, Central Asia, Middle East.

Solid Rivet - Overview

A solid rivet is a type of mechanical fastener characterized by its solid, cylindrical shaft and head on one end, used to permanently join two or more pieces of material. To install, the rivet is inserted into a pre-drilled hole, and the tail end is deformed, typically by hammering, to create a second head that clamps the materials together.

Product Specification

We provide the Flat Head Aluminum Solid Rivets specifications：

Nominal Diameter (D)		A	H
Fraction	Decimal	Head Diameter	Head Height
3/32	0.094	0.187	0.038
1/8	0.125	0.250	0.050
5/32	0.156	0.312	0.062
3/16	0.187	0.375	0.075
1/4	0.250	0.500	0.100
5/16	0.312	0.625	0.125
3/8	0.375	0.750	0.150

Advantages of Solid Rivet

Ease of Use
Solid rivets do not require any expertise or special equipment to install. Anyone with the knowledge and ability to use a hammer or hydraulic tool (properly) can install one. This helps to keep production rates high and keep costs down.

Quality Control
During the installation process, the joint in a solid rivet need to be accessed from both sides. This requires two people to be part of the installation. With two people making sure the rivet was installed correctly, the quality control process should be ensured. As a result, manufacturers have the guarantee that the rivet is tamper proof.

Durable
Solid rivets are made with a high resistance to corrosion because of the materials they're made with. This includes metals such as stainless steel and titanium. Since solid rivets themselves are durable and long-lasting, this also improves the durability of the item being fastened.

Cost-Effective
Solid rivets are typically very low-cost products, especially when bought in bulk. This low-cost, in addition to their efficiency, makes them a great alternative to other fasteners and adhesive joints. They are also very lightweight, which significantly lowers the cost of transport.

Resilient
The metals that are used to create solid rivets are strong. This means that rivets generally are able to retain their structure during installations. They are also pretty long-lasting fasteners and don't need to be replaced due to wear and tear.

Materials of Solid Rivet

Steel rivets

Steel rivets are among the most common, and they are used for general applications such as for ships, bridges, and construction projects.

Stainless steel

Stainless steel rivets combine high tensile strength with a finish that fights corrosion. They are sometimes used in construction, aerospace, and military equipment applications.

Brass

Brass rivets offer high strength, are corrosion-resistant, and have high thermal and electrical conductivity, so they are used in everything from marine equipment to architecture. They are also highly decorative, which is why they are used in clothing, such as in jeans.

Aluminum

Aluminum solid rivets have a very high strength-to-weight ratio, so they are used for aerospace, medium-duty equipment, camping gear, and other applications where weight is a factor. They are also nonmagnetic and nonsparking.

Copper

Copper is a strong, corrosion-resistant, antimicrobial metal that is an excellent electrical and heat conductor. Copper rivets are used in electronics and construction. Copper is also highly decorative, so copper rivets are also used in clothes, shoes, and luggage.

Nickel alloy

Nickel alloy solid rivets are high-strength rivets often used on boats and for marine applications. Nickel alloy also has a high acid resistance, a higher melting point, and is extremely tough.

Products Installation

Preparation
Before installing Round Head Rivets , some tools and materials need to be prepared, such as electric drill, drill, rivet, nail press, hammer, wrench, safety glasses, etc.

Rivet selection
According to the type and thickness of the material to be connected, select the appropriate rivets and specifications. Solid rivet with half round head is suitable for connecting metal and plastic materials.

Drilling

Drill holes corresponding to the diameter of the rivet on the two materials to be connected with an electric drill and a drill bit respectively, paying attention to the position and alignment of the two holes.

Install rivets

Insert the rivet into the two holes, place the bottom of the rivet into the groove of the nail press, and tighten the nail press with a wrench.

Pressure nails

Hit the top of the stud press with a hammer until the bottom of the rivet is flattened and fitted to the surface of the material. The close connection between the rivets and the material should be felt at this time.

Skills and precautions

Before drilling, apply a small amount of lubricating oil to the surface of the material in order to avoid the slide of the drill bit.During the installation process, be sure to wear safety glasses to avoid rivet cracking or unraveling.

Customization Process

Requirement Discussion

Design Proposal

Our professional team will develop a design proposal and provide a quotation based on your requirements.

Sample Production

We produce samples according to the design proposal and conduct rigorous testing.

Mass Production

Upon your approval, we commence mass production to ensure timely delivery and consistent quality.

After-Sales Service

We offer ongoing technical support and service to ensure the long-term stable operation of our products.

Other Services

Surface treatment: Plain, Galvanized, Hot Dip Galvanized, Black Oxide, Anodized, etc.
Excellent quality control system for fine dimensional accuracy.
Various materials are available as per your request
Conform to international standard.
We had got certificate of ISO9001: 2008, SGS & RoHS.
Prompt delivery.
Various sizes are available.
Material: Stainless Steel 18-8 18-10, Carbon steel Gr4.8 Gr8.8 Gr10.9, Gr12.9, Aluminum, Copper, etc.
Packing Stylet: General export packing
Can be made with different standards such as ISO, DIN, AS/NZS, GB, ANSI, BS and special standard.
Good customer service
OEM is available

Package & Delivery

Package:	Standard export package
Delivery:	By air express, by sea

productcate-1-1

FAQ

Q: What are solid rivets used for?

A: These simple tools consist of a solid shaft with a head on a particular side once it is punched in. The headless part on the other end gets deformed using a rivet gun or hammer. Solid rivets consist of only shafts and heads, which are deformed using a rivet gun or hammer.

Q: Are solid rivets stronger than blind rivets?

A: The rivet, being tubular, has a section that is obviously smaller than that of a solid rivet. This means one blind rivet is not as strong as one solid rivet of the same diameter.

Q: How long should solid rivets be?

A: The length of the rivet is very important. The rivet length protruding through the joint should be 1.5 times the rivet diameter. When the rivet has been set, the shop head should have a diameter of 1.5 the original rivet diameter, and its depth should be at least . 5 times the rivet diameter.

Q: What tool is used for solid rivets?

A: Buck rivet tools, when used with the appropriate bit, are typically used with a bucking bar to set solid rivets.

Q: What is the edge distance of a solid rivet?

A: The minimum edge distance is 2 diameters of the shank of the rivet being used. Distance between rivets in the same row is called pitch. Minimum pitch is 3 diameters of the shank of the rivet.

Q: Are you manufacturer or trading company?

A: We are manufacturer.

Q: What's your best delivery time?

A: Within 15-30 days.

Q: What is the quality control of your product?

A: Follow strictly quality control measures for implementation,

Q: Will your company provide free sample?

A: It depends on which sort of item you want to get. Some can be provided free of charge, however, the client shall assume the shipping fees himself.

Q: Is OEM open to clients?

A: Yes, we can provide both OEM and ODM service.

Q: How can our company be your distribution partner?

A: We welcome you to be our distributor. For further details, please contact us.

Q: What is the payment of sample?

A: T/T and Alipay both acceptable.

Q: What is your sample policy?

A: If we have stock, we can provide samples, but the customer must pay the sample fee and express fee Question.

Q: Have you tested all your goods before shipment?

A: Yes, we will conduct 100% test before delivery, and we will send detailed photos of parts for your approval Question.

We're well-known as one of the leading solid rivet manufacturers and suppliers in China. If you're going to wholesale high quality solid rivet made in China, welcome to get pricelist and free sample from our factory. Also, OEM service is available.

bolts, Hot DIP Galvanized Anchor Bolts, Flat Head Hexagon Socket Countersunk Screw

Send Inquiry