Pin Dowel with Hole
Type:Clevis pins
Material: Carbon steel
Surface treatment: bright
Products Description
Pin dowel with hole is a common mechanical part. It can not only be used as a shaft, but also can be added with a flange, a washer and a split pin block at one end to form a special connection method.
This kind of pin usually uses cylindrical accessories and can be used to connect chain plates, chains and other parts.
In addition, the Pin Dowel With Hole can also be used as part of the hinge connection to fix the hinge of two parts.
Products parameter
Unit: mm
| Mattress Size | Mattress Size/cm | Box Size/cm | 20GP | 40HQ |
| Single | 92*188 | 37*37*102 | 192PCS | 476PCS |
| King-Single | 107*203 | 37*37*117 | 180PCS | 420PCS |
| Double | 138*188 | 37*37*148 | 144PCS | 336PCS |
| Queen | 153*203 | 37*37*163 | 108PCS | 302PCS |
| King | 183*203 | 37*37*193 | 108PCS | 252PCS |
| Nominal diameter d | Dk | d1 | K | L-Lh |
| 3 | 5 | 1.6 | 1.5 | 2 |
| 4 | 6 | 1.6 | 1.5 | 3 |
| 5 | 8 | 2 | 2 | 3 |
| 6 | 10 | 2 | 2 | 4 |
| 8 | 12 | 3.2 | 2.5 | 4 |
| 10 | 15 | 3.2 | 3 | 5 |
| 12 | 16 | 4 | 3 | 5 |
| 14 | 18 | 4 | 3 | 5 |
| 16 | 20 | 4 | 3.5 | 5 |
| 18 | 22 | 5 | 3.5 | 5 |
| 20 | 25 | 5 | 4 | 6 |
| 22 | 28 | 5 | 4 | 6 |
| 24 | 36 | 6.3 | 5 | 6 |
Products Material and performance
The commonly used materials for the Pin Dowel With Hole are 35 or 45 steel
These materials can obtain different hardness after heat treatment to meet different usage requirements.
For example
After quenching and tempering, 45 steel can obtain better cutting performance and higher comprehensive mechanical properties such as strength and toughness. If a higher surface hardness is required, 45 steel can be surface quenched, which can obtain the required surface hardness while maintaining good mechanical properties.
Products Size and specifications
There are many sizes and specifications for the Pin Dowel With Hole
1.For example, according to the GB882-88 standard, the number of holes in the pin can be 8, which can ensure that other parts can be connected as a whole, enhancing the firmness and stability of the entire structure.
2.In addition, the tolerance and fit clearance or interference requirements of the pin also need to be determined according to the specific application.
Products application
Hot Tags: pin dowel with hole, China pin dowel with hole manufacturers, suppliers, factory, Cylindrical Pin Locating Pin, Baby Anti Luce Clip, External Tooth Gasket, L Shaped Concrete Anchors, spring washer, Stainless Steel Thumb Screws
You Might Also Like
Send Inquiry