Home / Products / Automotive Fasteners / Accessories / Content

Metal Locking Star Washers

Number:LM-1232
Type：Metal Locking Star Washers
Placement on Vehicle：Array
Features：Anti-rust, sturdy
Material：Steel

Send Inquiry

Products Description

Metal Locking Star Washers‌

is an accessory used in the engine compartment of an automobile, mainly used to fix and protect the firewall thermal insulation foam to prevent it from moving or damage. This fitting is usually made of metal and has a circular gasket design, which can be effectively fixed to the firewall thermal insulation cotton to play a role in insulation and protection.

In addition

it can also be used as a connector to fix the thermal insulation cotton in the appropriate position in the engine compartment, preventing heat transfer to the rest of the vehicle, thereby protecting the vehicle structure and passenger safety. The material and design of this accessory can withstand high temperatures and vibration, ensuring that it will still function effectively in extreme conditions. ‌

Products Function

washer ensures the safety and driving comfort

of the engine compartment of the car by fixing the thermal insulation cotton,

and is an indispensable part of the vehicle maintenance and modification.

Point 1

Main function of Metal Locking Star Washers is to fix the thermal insulation cotton and prevent it from moving or falling off, so as to ensure its thermal insulation and sound insulation effect. ‌

Point 2

Design and use of Washers is designed to improve safety and comfort of car.In engine compartment of car, firewall insulation cotton can effectively isolate heat generated by engine.

Point 3

When installing thermal insulation cotton, it is necessary to remove irons that support it, and two people may be required to complete it, which indicates that installation process requires technology and patience.

Products Video

Products Installation

To remove Metal Locking Star Washers

use a screwdriver, crowbar, or wrench ,specific steps are as follows

‌Use a screwdriver to remove the clip:

First, use a small screwdriver to remove the top clip. It should be noted that the buckle may pop out, so it needs to be handled with care. If the buckle comes out and needs to be gently pulled out, the buckle below is also taken out in the same way.

‌Use a crowbar or pry board:

For some clips, you may need to use a crowbar or pry board to remove them. These tools can help pry the clasp away from the heat shield or twist it open. Some fasteners may be threaded and need to be loosened with an open end wrench.

‌

Use pliers or wrench:

Pliers or wrench may be required to unfasten plastic fastener. These clasps are usually held in place by bolts or nuts and need to be carefully loosened and removed.Do not use too much force during the removal .