How to install the pin?

 

The installation method of the pin is as follows:
1. Prepare tools: pin, electric drill, drill bit, rubber hammer, nail remover.
2. Mark the location where the pin needs to be installed, and use the electric drill to drill a hole that matches the size of the pin.
3. Insert the pin into the hole and tap it gently with a rubber hammer until the pin is completely embedded.
4. Finally, use the nail remover to knock the raised part on the top of the pin flat.
Precautions:
1. Unskilled personnel should not attempt to install.
2. During installation, it is necessary to ensure that the drill hole matches the size of the pin to avoid installation failure due to being too large or too small.
3. Pay attention to safety during installation to avoid injuries caused by tools such as drill bits.
The above is the installation method of the pin. Please operate with caution during installation.