Semi Tubular Rivet
Model:Semi Tubular Rivet
Material:Stainless Steel,Brass,Aluminum,Carbon steel
Surface Finish:Zn-plating,Silver plating,etc.
Products Description
Semi Tubular Rivet is a kind of rivet, which is characterized by a solid structure on the top and middle of the rivet, and a hollow structure at the tail.During installation, the hollow part of the tail is squeezed and flanged outwards to form a buckle to fix the connector . Flat head rivet head is flat shape, suitable for the need to strengthen the fixing and support occasions. For example, the installation of locks, connection of body components, reinforcement panels, etc., usually using flat head semi-hollow rivet.
Products Parameter
| Nominal diameter |
Ф2 |
Ф2.5 |
Ф3 |
Ф4 |
Ф5 |
Ф6 |
Ф8 |
|
| d | Max | 2.06 | 2.56 | 3.06 | 4.08 | 5.08 | 6.08 | 8.1 |
| Min | 1.94 | 2.44 | 2.94 | 3.92 | 4.92 | 5.92 | 7.9 | |
| dk | Max | 3.74 | 4.74 | 5.74 | 7.79 | 9.79 | 11.85 | 15.85 |
| Min | 3.26 | 4.26 | 5.26 | 7.21 | 9.21 | 11.15 | 15.15 | |
| k | Max | 0.68 | 0.68 | 0.88 | 1.13 | 1.13 | 1.33 | 1.33 |
| Min | 0.52 | 0.52 |
0.72 |
0.87 | 0.87 | 1.07 | 1.07 | |
| d1 | Max | 1.12 | 1.62 | 2.12 | 2.62 | 3.66 | 4.66 | 6.16 |
| Min | 0.94 | 1.44 | 1.94 | 2.34 | 3.22 | 3.92 | 4.42 | |
| t | Max | 2.24 | 2.74 | 3.24 | 4.29 | 5.29 | 6.29 | 8.35 |
| Min | 1.76 | 2.26 | 2.76 | 3.71 | 4.71 | 5.71 | 7.65 | |
Products Installation
application method of Semi Tubular Rivet is very simple
Specific application steps are as follows
First
Pass the rivet through the hole on the riveted workpiece and place the rivet head on one side of the workpiece.
second
Use riveting pliers to grip the tail of the rivet, make it closely fit with the workpiece, and put the hook claw into the head of the rivet.
third
Operate the rivet pliers to move the rivet, press the head of the rivet, and connect the tail with the riveting workpiece.
fourth
Finally, move the rivet pliers, pull them out from the end of the rivet, and check the connection after riveting to ensure its quality and reliability.
Products Feature
Material:
Material of flat head semi-hollow rivet should comply with relevant industry standards and regulations, common materials .
Strength:
The strength of the flat head semi-hollow rivet should meet the standard to ensure that it can withstand the specific load.
Surface treatment:
The surface of the flat head semi-hollow rivet should be specially treated to improve its corrosion resistance and service life.
Hot Tags: semi tubular rivet, China semi tubular rivet manufacturers, suppliers, factory, Hexagon Countersunk Head Screws, wave washer, self drilling screws, Lifting Eye Bolt, Spring Dowel Pin, Chamfered Hexagon Socket Screws
You Might Also Like
Send Inquiry