Industry

1. Check the coolant status Level check: Ensure the coolant level is between the "MIN" and "MAX" marks on the reservoir. A low lev

1. Parts Directly Affecting Welding Quality Inspection Focus: Check if core components such as the welding head, electrodes, and optical path system a

1. Material Factors Welding material problems: Welding rods or wires are damp or contaminated with oil, releasing gas when heated. Base material probl

1. Material Cleaning and Drying Welding Material Treatment: Before use, check that the electrode coating is intact and avoid moisture or damage; alkal

1. Undercut Phenomenon: The base metal at the edge of the weld melts but is not filled, forming a depression. Cause: Excessive current, excessive arc

1. Mechanical Surface Treatment Sandblasting: Using a high-speed stream of abrasive particles to impact the surface, cleaning impurities and increasin

1. Visual Inspection Observe the surface visually or with a magnifying glass to check for flatness and defects such as scratches, dents, oxidation, or

1. Materials and Casting Process Material Selection: High-quality welding tables typically use HT250 or HT300 gray cast iron, with tensile strengths o

Preparation Before Leveling Before you begin leveling, please ensure: Platform Cleanliness: Wipe the platform surface with a clean, damp cloth to remo

I. Using Professional Measurement Tools 1. Electronic Level Measurement Place the electronic level on the platform surface and measure the height diff

1. Check printing dimensional accuracy If the printed model is approximately 1 mm smaller than the actual size in the X and Y directions, but all prop

I. Basic Equipment Calibration 1. Laser Power Calibration Measure the actual output power using a power meter and compare it with the set value. Adjus