What Are Some Effective Methods For Rust Prevention Of 3D Welding Workbenches?

Oct 31, 2025

Leave a message

 

I. Surface Treatment Technology

1. Chemical Treatment
* Blackening Treatment:** Suitable for steel platforms, forms a black oxide film (5-10μm thick), low cost but short protection period.
* Nitriding Treatment:** Nitriding treatment of cast iron platforms results in a bluish-gray color; temperature control is necessary to prevent brittleness and cracking; protection period can reach 1-2 years.
* Chromium Plating Treatment:** For steel platforms, the plating thickness is ≥20μm, resulting in a silvery-white surface with strong corrosion resistance, suitable for high-precision applications.

2. Coating Protection
* Epoxy Resin Spraying:** Forms a protective layer of ≥50μm; for outdoor use, it is recommended to use with a UV stabilizer.
* Solvent-Diluted Rust Inhibitor Oil:** After evaporation, forms a hard protective film, suitable for rust prevention of complex structures.

 

II. Daily Maintenance Standards

1. Cleaning Procedure
* Use compressed air (≤0.6MPa) to remove welding slag from the holes; clean the locating pin holes with a copper brush.

* For stubborn rust spots, lightly polish with 600-grit sandpaper dipped in oil; do not use strong acid solvents.

2. Rust Prevention Cycle
* High-frequency use: Apply lithium-based grease monthly; check flatness (≤0.10/1000mm) quarterly.

* Long-term storage: Cover with vapor phase rust inhibitor paper + paraffin seal; control humidity below 40%.

 

III. Environmental Adaptability Plan
* High humidity environment: Prioritize double protection with chrome-plated platform + rust-preventive oil; check for rust daily.

* Welding spatter area: Install a removable protective plate; promptly remove spatter with a copper hammer.

 

IV. Special Material Treatment
* Cast iron platform: After nitriding, avoid mechanical impact; regularly check the integrity of the nitrided layer. • Steel platform: Phosphating pretreatment is required before chrome plating to enhance coating adhesion.

Send Inquiry